|
Statistics
Visitors: 925620
Advertisement
Notebook Computers
For the best deals on laptop computers visit www.Geeks.com.
|
|
HighSpeed PC Tech Station 2 |
|
|
|
|
Written by Mikhail Ivanenkov
|
|
Wednesday, 13 June 2007 |
|
Page 1 of 3
Thanks to HighSpeed PC for the product sample.
Although the majority of computer users (and even enthusiasts) will put together a system and let it sit for months before cleaning or upgrading, there are a select few who can't help but tinker with the insides time and time again. And let's not forget IT professionals and computer shops, or any place for that matter which requires constant, easy access to PC components. For the longest time my test system was spread out all over the desk. HighSpeed PC answered our call with their Tech Station. Today we're proud to take a look at their latest revision, the noticeably larger version 2.
Much like the original, the Tech Station 2 is available either as a kit or pre-assembled. Opting for the latter will run you an extra $15 and up to two more days of processing. Personally, I would recommend anyone who purchases this kit to put it together on their own. It does take a bit of time, some sweat, and (as I later found out) a powered screwdriver, but the resulting satisfaction is worth the effort. It's just like putting together a DIY acrylic case. Overall it measures 14" x 13" (version 1 measures 14" x 8") and stands about 8" tall (with roughly 7" of clearance between the two shelves). It's available in black (shown above), white, red, green, blue, and yellow.
According to the website, the new features in version 2 (aside from the larger dimensions) are the secure motherboard standoff system, stiffer AGP/PCI support brace, cleaner cut edges, and an updated ATX control kit. There aren't a whole lot of pieces. You get a 2 half-inch shelves, 4 pillars, 2 acrylic HDD mounts, an AGP/PCI support brace, a pair of 120mm midrange fans with complimentary chrome grills, instructions, the ATX control switches, and various screws, standoffs, and other parts.
The provided fans are made by Evercool, with model number EC12025M12S and are rated at 12V at 0.34A with a power consumption of 4.08W. According to their website it spins at 2000RPM and pushes 80CFM at around 36dBA with a power consumption of 3.36W (and 0.28A current). This isn't entirely consistent with the 0.34A/4.08W rating on these particular fans, but it's the closest I could find. If anything they're midrange, mid-noise level blowers.
<< Start < Prev 1 2 3 Next > End >>
|
|
Last Updated ( Friday, 15 June 2007 )
|
|
|
